Fun Remodelaholic fact for you: Back when we started the site, it was all about turning something old into something new, repurposing, reusing, re-doing. We’ve evolved a little bit since then and added a lot more topics, but we still love updating something that’s old/broken, dated, or not your style into something that you love, that can reflect both its original character AND the added character that you want in your home. Plus, buying secondhand, reusing an inherited piece, or picking up a curbside find (score!) is a great way to save money on decorating your home. Once you’ve found a great piece, it’s time to prep it so you can make it AMAZING! We’ve teamed up with the folks from the Hot Shot® brand to share all the tips and tricks that you need to know to make your refinishing project a success.
How to Prep and Refinish Furniture
This is a sponsored post written by me on behalf of Hot Shot® Insecticides. All opinions are mine. This post also contains affiliate links. Learn more about how partnerships like these help keep our site running at no cost to you here.
Before you buy: be sure to inspect the piece to make sure there are no obvious red flags that will make it more work than it’s worth to salvage. Issues such as mold or rotting can sometimes be an easy fix, but even if you decide to take on a bigger problem, it’s always good to have an idea of what you’re dealing with before you haul something home.
1: Get rid of the bugs
I’ve mentioned before that this is my first step when we move into a new-to-us home, and the same goes for new-to-us furniture — NO BUGS ALLOWED! The last thing that you want is to put the effort into refinishing a piece of furniture only to discover halfway through the project that you’ve got creepy crawly company. ICK!
Bugs are an easy fix though — before bringing the piece into your home, spray the piece with Hot Shot® Bed Bug & Flea Home Insect Killer2 (Ready to Use) and wait the recommended amount of time before bringing it into your home. (As with any product, be sure to read the full product label prior to use, so you know you’re giving it time to work properly.) Then your furniture is ready for a redo, and you can have the peace of mind of knowing that you won’t be bringing any unwanted bed bugs or other pests guests into your home with your fabulous new project.
2. Get rid of the smell
Pre-owned furniture usually comes with a few smells of its own, especially if you’ve rescued a roadside find or gone dumpster diving (guilty!). Time on its own *might* do the trick, but who has the patience for that, especially with fun new project?! Luckily, there are lots of ways to refresh and remove odor from a used piece of furniture.
For upholstered projects or pre-loved rugs, a fabric refresher/deodorizing spray (you can make your own), and a good cleaning (with steam, if the material allows) and vacuuming is a good place to start. For stronger smells and stains, I’ve had pet enzyme cleaner recommended (even if the smells and stains aren’t from pets) but I haven’t personally tried it yet.
Cigarette smoke is a common but more stubborn problem with pre-owned furniture. While it’s nearly impossible to get the smoke smell out of upholstery without starting from scratch, there are many different ways to get smoke and other odors out of wood furniture.
I like to start by wiping the entire piece down with a solution of diluted vinegar to neutralize the odors, and then, for any remaining musty smells or other odors, put an open container of baking soda inside the piece or sprinkle it around the piece liberally and let it do its work absorbing any odor. Once the smell is gone, just vacuum or sweep the baking soda out. If baking soda doesn’t do the trick or you don’t have any on hand, you can also use other materials such as:
- cedar strips
- charcoal briquettes
- coffee grounds
- crumpled up newspaper
- kitty litter
- dryer sheets
- or grandma’s standby: scented satchets!
With satchets and vinegar, I like to add a drop or two of essential oils as well to help freshen as it removes the odor — lemon is my favorite!
Sunshine is also a great natural freshener, just be careful that the piece doesn’t sustain any damage, such as cracking or fading, while its soaking up the rays.
Also, if you’re dealing with a piece built from cedar, like a cedar chest, lightly sanding (and vacuuming) the unfinished cedar will release fresh cedar scent.
If it’s a piece you’re planning to sand and seal, a shellac or varnish may also help cover up any remaining odor.
3. Prep for paint
Not painting? This time-tested method for refinishing quality wood furniture will help restore a piece to its former glory!
There are lots of different methods for repainting furniture, but I personally always sand a piece, at least lightly, before painting — no matter what type of paint I’m using. Remember, any imperfections (dents, splinters, etc.) will only be amplified by a coat of paint! Some wood filler and caulk, lovingly applied, can work wonders in making an old piece shine like new.
Once you’re ready to sand, you’ll need a variety of sanding materials (depending on the piece’s shape and style). Remember to suit up with proper eye protection and a respiratory mask before you start kicking up the dust, too!
For larger pieces, a larger electric sander like an orbital sander will save your arms a lot of work (and don’t forget some extra sanding pads!). A handheld belt sander can be great for sanding larger curves (like on our Swedish mora clock) and a smaller mouse sander is also helpful for those tricky corners or smaller surfaces. You can also use a sanding attachment for a drill (like our drill attachment we used on our built-in closet) or a sanding attachment for a rotary tool.
When it comes to areas that are more delicate or have more curves than an electric sanding can handle, put your hand-sanding finesse to work with a sanding block for flat areas, or a sanding sponge for a bit of a curve. For more detailed or smaller sections, super fine (#0000) steel wool can do the job, or for really tricky intricate curves and carved pieces, try Beck’s low-to-no sanding method.
After you sand, be sure to remove all the sanding dust with a vacuum and a tack cloth to ensure your paint job will turn out perfect!
Once you’ve prepped your piece and killed the bugs, de-odorized, and prepped it for paint — you’re ready to refinish!
Slipcover: If you’ll be slipcovering the piece, grab an old sheet and follow this tutorial. Sheets are inexpensive material for making a test or pattern without the risk of ruining the more expensive and painstakingly chosen upholstery fabric.
Reupholster: If you’re completely reupholstering, you’ll start by very carefully removing each piece of fabric and taking very good notes (learn more in this post). And don’t toss any of the hardware or metal strips as you take apart the chair — often you’ll be able to reuse them!
Restore leather: If you’ve got leather chair that needs some love, this method for refreshing leather upholstery is super simple!
Plump cushions: If your project chair or sofa needs some cushion help, try one of these methods to give it back some shape and form.
Fix rusty chrome: If the chrome on your piece has seen better days, all you need to polish away the rust is a bit of tin foil and some water. Yup, it’s that easy! More details here.
Happy refinishing! What’s your best tip for refinishing furniture?
The post Must-Know Tips to Prep and Refinish Furniture appeared first on Remodelaholic.
No comments:
Post a Comment